DiY Project : Mapped out IKEA Kassett boxes
The things you need to remember are: you should work panel-by-panel, starting with the front. This is where the most interesting part of the map will be. Cut a piece of the map and make sure it is at least 1.5” larger than the panel then glue it to the front of the box and fold the edges over. Work
your way to the back then the sides and lastly the bottom. Once the boxes are dry, clear the holes for the mounting hardware and poke through from the inside with a sharp knife or cutter. Once you have finished reassembling the boxes, you can use them to decorate your home office or even any part of the house. This DiY project is a dream come true for the traveller in you
your way to the back then the sides and lastly the bottom. Once the boxes are dry, clear the holes for the mounting hardware and poke through from the inside with a sharp knife or cutter. Once you have finished reassembling the boxes, you can use them to decorate your home office or even any part of the house. This DiY project is a dream come true for the traveller in you
